US180 2D Barcode Scanner
← RZ-G
US180 2D Barcode Scanner
The following instructions explain how to run the 2D Barcode Scanner demo on the US108 2D Barcode scanner carrier board with a plugged in SMARC 2.0 RZ/G2L SOM. It is assumed that a bootable Linux image with the 2D Barcode scanner demo exist on a micro SD card and that the SD card is plugged into the SC card slot of the RZ/G2L SMARC SOM.
Items needed:
- 1. Computer with two USB ports
- 2. US108 2D Barcode Scanner Carrier board
- 3. RZ/G2L SMARC SOM
- 4. Google Coral camera with ribbon cable
- 5. LED board with flashlight LEDS and red pointer LED
- 6. Camera adapter board
- 7. RJ50/USB cable
- 8. UART USB converter with ribbon cable
- UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL
- Amazon.com: DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL : Electronics
- 9. Terra Term
- 10. Documentation
- a. Barcode Scanner PoC Hardware User Manual-v11-20220112_002023.pdf
- b. Barcode Scanner PoC Software User Manual-v17-20220112_002123.pdf