US180 2D Barcode Scanner
← RZ-G
US180 2D Barcode Scanner
Yocto Build Project
Below is the repository with instructions to build the image.
Operating Instructions
The following instructions explain how to run the 2D Barcode Scanner demo on the US108 2D Barcode scanner carrier board with a plugged in SMARC 2.0 RZ/G2L SOM. It is assumed that a bootable Linux image with the 2D Barcode scanner demo exist on a micro SD card and that the SD card is plugged into the SC card slot of the RZ/G2L SMARC SOM.
Items needed:
- 1. Computer with two USB ports
- 2. US108 2D Barcode Scanner Carrier board
- 3. RZ/G2L SMARC SOM
- 4. Google Coral camera with ribbon cable
- 5. LED board with flashlight LEDS and red pointer LED
- 6. Camera adapter board
- 7. RJ50/USB cable
- 8. UART USB converter with ribbon cable
- UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL
- Amazon.com: DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL : Electronics
- 9. Terra Term
- 10. Documentation
- a. Barcode Scanner PoC Hardware User Manual-v11-20220112_002023.pdf
- b. Barcode Scanner PoC Software User Manual-v17-20220112_002123.pdf