RZ-G/Chromium
This page contains information about building and using Chromium with the Renesas BSP.
You can choose between two versions: Chromium v116 and Chromium v109.
Please bare in mind that only Chromium v109 supports GPU Acceleration.
How to build Chromium 116.0.5845.187 for RZ/G2L,LC + VLP/Gv3.0.5
- (1) Follow "3. Build Instructions" described in the Release Note until 3.1(5) .
- (2) Perform the following steps to prepare the recipe for the Chromium build.
$ git clone https://github.com/kraj/meta-clang -b dunfell-clang14 $ git clone https://github.com/OSSystems/meta-browser.git $ cd meta-browser $ git checkout e75da7cc83393b174220b808d96f8f05ab7ad4d2 $ cd ../ $ rm -rf meta-openembedded/ $ git clone https://github.com/openembedded/meta-openembedded $ cd meta-openembedded $ git checkout 116bfe8d5e5851e7fc5424f40da8691a19c5b5ee
- (3) Perform the following steps to add Chromium build settings to the configuration file.
$ cd ../build $ bitbake-layers add-layer ../meta-clang $ bitbake-layers add-layer ../meta-browser/meta-chromium $ bitbake-layers add-layer ../meta-openembedded/meta-networking
- (4) Add the following lines to local.conf(build/conf/local.conf) manually.
IMAGE_INSTALL_append = " chromium-ozone-wayland" IMAGE_INSTALL_append = " ntp" IMAGE_INSTALL_append = " ttf-sazanami-gothic ttf-sazanami-mincho " PREFERRED_VERSION_nodejs-native = "14.%"
- (5) Run bitbake
$ MACHINE=smarc-rzg2l bitbake core-image-weston
- Chromium startup command
- ⚠️ Note: You must have an input device (USB mouse or touchscreen) plugged in before you start the browser. If you do not, you will get a "Segmentation fault"
chromium --no-sandbox --in-process-gpu --use-gl=desktop https://XXXXX
Note: Currently, the HW codec and the GPU features has not been supported yet.
How to build Chromium 109.0.5414.74 for RZ/G2L,LC VLP/G v3.0.5 update3
- (1) Follow "2. Build Instructions" described in Linux Start-up Guide until 2.1(5). Please make sure you have added the required layers: Graphics (RZ/G2L & RZ/G2LC), Video Codec (RZ/G2L).
- (2) Perform the following steps to prepare the recipe for the Chromium build.
$ git clone https://github.com/kraj/meta-clang -b dunfell-clang12 $ git clone https://github.com/OSSystems/meta-browser.git $ cd meta-browser $ cd .. $ git checkout f2d5539552b54099893a7339cbb2ab46b42ee754
- (3) Perform the following steps to add Chromium build settings to the configuration file.
$ cd ../build $ bitbake-layers add-layer ../meta-clang $ bitbake-layers add-layer ../meta-browser/meta-chromium $ bitbake-layers add-layer ../meta-openembedded/meta-networking
- (4) Add the following lines to local.conf (build/conf/local.conf) manually
IMAGE_INSTALL_append = " chromium-ozone-wayland" IMAGE_INSTALL_append = " ntp" IMAGE_INSTALL_append = " ttf-sazanami-gothic ttf-sazanami-mincho " PREFERRED_VERSION_nodejs-native = "14.%"
For RZ/G2L add these lines, too
DISTRO_FEATURES_append = " h264enc_lib" PACKAGECONFIG_pn-chromium-ozone-wayland =" proprietary-codecs"
- (5) Run bitbake
$ MACHINE=smarc-rzg2l bitbake core-image-weston
- Chromium startup command
- ⚠️ Note: You must have an input device (USB mouse or touchscreen) plugged in before you start the browser. If you do not, you will get a "Segmentation fault"
chromium --no-sandbox --in-process-gpu --use-gl=desktop https://XXXXX