RZA MBED Support
Supported Sites
- RZA1H MBED GR-PEACH Site
- RZ/A1H MBED GR-PEACH with J_Link debug Site
- RZA1LU MBED GR-LYCHEE Site
- RZA2M MBED GR-MANGO Site
Quick Start Guide
J-Link
Besides debugging GR-MANGO with OpenOCD, connecting a Segger j-link is supported as well.
It's similar to the setup described for GR-PEACH Site.
Connect the 9-pin J-Link connector:
Modify the debug configuration as described for GR-PEACH, but with a different device name for GR-MANGO:
Target Device: R7S921058
MBED Windows USB Driver
Make sure you have installed latest driver from the mbed site here.
Plug the RZ GR board into the PC.
GR-MANGO | GR-PEACH | GR-LYCHEE | |
---|---|---|---|
Open the Windows OS Device Manager. You should see the device here.