RZA MBED Support: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 14: | Line 14: | ||
Connect the 9-pin J-Link connector: | Connect the 9-pin J-Link connector: | ||
[[File:GR-MANGO with 9pin J-Link connection.png | [[File:GR-MANGO with 9pin J-Link connection.png|600x600px|GR-Mango and J-Link connection|thumb|none]] | ||
Modify the debug configuration as described for GR-PEACH, but with a different device name for GR-MANGO: | Modify the debug configuration as described for GR-PEACH, but with a different device name for GR-MANGO: | ||
Target Device: R7S921058 | Target Device: R7S921058 | ||
[[File:GR-MANGO e2studio setting for J-Link debugger.png | [[File:GR-MANGO e2studio setting for J-Link debugger.png|600x600px|e²studio debug configuration for GR-MANGO plus J-Link|thumb|none]] | ||
=MBED Windows USB Driver= | =MBED Windows USB Driver= | ||
Latest revision as of 14:53, 12 December 2022
Supported Sites
- RZA1H MBED GR-PEACH Site
- RZ/A1H MBED GR-PEACH with J_Link debug Site
- RZA1LU MBED GR-LYCHEE Site
- RZA2M MBED GR-MANGO Site
Quick Start Guide
J-Link
Besides debugging GR-MANGO with OpenOCD, connecting a Segger j-link is supported as well.
It's similar to the setup described for GR-PEACH Site.
Connect the 9-pin J-Link connector:
Modify the debug configuration as described for GR-PEACH, but with a different device name for GR-MANGO:
Target Device: R7S921058
MBED Windows USB Driver
Make sure you have installed latest driver from the mbed site here.
Plug the RZ GR board into the PC.
| GR-MANGO | GR-PEACH | GR-LYCHEE | |
|---|---|---|---|
Open the Windows OS Device Manager. You should see the device here.
