RZ/V2M SMARC Board by Renesas

From Renesas.info
Revision as of 01:23, 27 October 2021 by Zkmike (talk | contribs) (Steps to build the RZV2M BSP and its components)
RZV2M EVK.jpg

← RZ-V

General Information

🚧 Coming soon...

Getting Started

1. Software BSP Components

  • Linux BSP package: Obtain the 'rzv2m_bsp_eva_v110.tar.gz' tar file. This is located the RZV2M Linux Package downloaded zip file r01an5971ej0110-rzv2m-linux.zip. The tar file is in the 'bsp' sub folder of the extracted zip file.
  • ISP Support package: Obtain the 'rzv2m_isp_support-pkg_v110.tar.gz' file from the RZV2M ISP Support Package file 'r01an5978ej0110-rzv2m_isp-support.zip' downloaded from the Renesas RZV2M site.
  • DRP-AI Support package: Obtain the DRP AI driver 'rzv2m_meta-drpai_ver5.00.tar.gz' and DRP Application 'rzv2m_meta-drpai_ver5.00.tar.gz'. These are packaged in the RZV2M DRP-AI Support Package file 'r11an0530ej0500-rzv2m-drpai-sp.zip'. Once the zip file is extracted the driver is located in the rzv2m_drpai-driver sub-directory. The DRP Application software is located in the rzv2m_drpai-sample-application directory.

2. Build Environment

  • To build the BSP, you will need a Linux environment running Ubuntu 16.04.
  • A docker file is available the Renesas Github here
  • VM is not recommended.

3. Build the BSP

  • The complete set of BSP Components need to be combined into the same directory.
  • Detailed instructions for setup and building are located in the components release notes ( RZV2M Linux Package, RZV2M ISP Support Package, and RZV2M DRP-AI Support Package).
    • NOTE: RZV2M ISP Support Package release note is not included in the archieve file but is a seperate download on the Renesas RZV2M website.
  • A summary of the instructions located in the Release Notes are below. Simply Copy/Paste the commands


4. Prepare an SD Card

5. Power the Board and Connect to the Serial Port

6. Switch settings for the CPU SOM board.

Retrieved from "https://renesas.info/w/index.php?title=RZ-V/RZ-V2M_EVK&oldid=690"