RZ-G/RZG camera: Difference between revisions
No edit summary |
No edit summary |
||
Line 62: | Line 62: | ||
3. Run | 3. Run | ||
<pre> | <pre> | ||
root@hihope-rzg2m:~# modprobe uvcvideo # to enable USB camera driver | |||
root@hihope-rzg2m:~# gst-launch-1.0 v4l2src device=/dev/video0 ! videoconvert ! waylandsink | root@hihope-rzg2m:~# gst-launch-1.0 v4l2src device=/dev/video0 ! videoconvert ! waylandsink | ||
</pre> | </pre> |
Revision as of 22:01, 6 May 2021
← RZ-G
Displaying Camera Images using GStreamer
Using MIPI Camera
These instructions are for using a OV5645 MIPI Camera and MIPI Adapter Mezzanine board.
Before GStreamer can be used, the VIN/CSI settings must best configured manually on the command line using the media-ctl utility.
In the BSP, this is done by running the script /home/root/vin-init.sh in the rootfs.
This file located in the BSP at rzg2_bsp_eva_v104/meta-rzg2/recipes-multimedia/vin-init/files/vin-init.sh
The BSP also installs the file systemd service file "vin.service" into /etc/systemd/system/multi-user.target.wants/vin.service so that the vin-init.sh script runs automatically on system boot.
For example, for RZ/G2E,the follow command will be executed:
media-ctl -d /dev/media0 -r media-ctl -d /dev/media0 -l "'rcar_csi2 feaa0000.csi2':1 -> 'VIN4 output':0 [1]" media-ctl -d /dev/media0 -V "'rcar_csi2 feaa0000.csi2':1 [fmt:UYVY8_2X8/1280x960 field:none]" media-ctl -d /dev/media0 -V "'ov5645 3-003c':0 [fmt:UYVY8_2X8/1280x960 field:none]"
This connects VIN4 (/dev/video0) to OV5645.
The only thing you can change in G2E is 'VIN4 output' => 'VIN5 output' if you want to use /dev/video1
For more information, please refer to the document R01US0400EJ0107_GStreamer_UME_v1.0x.pdf that comes the RZG2 Group BSP Manual Set that can be downloaded from renesas.com
Using USB Camera
These instructions are useful to check if USB camera is working or not with RZ/G2 board.
1. Check whether UVC driver is enabled or not. If there is no output, UVC driver is not enabled.
root@hihope-rzg2m:~# zcat /proc/config.gz | grep USB_VIDEO CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
root@hihope-rzg2m:~# dmesg | grep uvcvideo [ 1.977174] usbcore: registered new interface driver uvcvideo [ 3.070300] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:0892)
2. Check camera device number
root@hihope-rzg2m:~# v4l2-ctl --list-devices fe960000.vsp rpf.0 input (platform:fe960000.vsp): /dev/video2 /dev/video3 /dev/video4 /dev/video5 /dev/video6 /dev/video7 fe9a0000.vsp rpf.0 input (platform:fe9a0000.vsp): /dev/video8 /dev/video9 HD Pro Webcam C920 (usb-ee000000.usb-1): /dev/video0
3. Run
root@hihope-rzg2m:~# modprobe uvcvideo # to enable USB camera driver root@hihope-rzg2m:~# gst-launch-1.0 v4l2src device=/dev/video0 ! videoconvert ! waylandsink