RZA3UL TES Guiliani Getting Started Guide

From Renesas.info
Revision as of 23:09, 2 November 2022 by Zkmike (talk | contribs) (Added pictures for selecting project)

Getting Started

This section describes how to Compile and download the Tes Guilaini Demos on to the RZA3UL.

NOTE: If the IPL has not been loaded refer to the Loading the IPL.

  1. Extract the Tes Guiliani archive file (Guiliani_SDK_<version>_Renesas_RZA3UL_FreeRTOS10_eGML.zip) to a working directory.  ( i.e. C:\workspace ) The resulting directory will look like this.
└── Guiliani_SDK_2.5.0_Renesas_RZA3UL_FreeRTOS10_eGML
    ├── CMake
    ├── Documentation
    ├── Export
    ├── External
    ├── FlashTools
    ├── GSE
    ├── Guiliani
    ├── Renesas
    ├── SR_GuilianiDemo
    ├── StreamRuntime
    └── eGaC
  1. Start eclipse IDE
    1. In the IDE workspace dialog select the Renesas subdirectory in the extracted folder
      1. Example : C:\workspace\Guiliani_SDK_2.5.0_Renesas_RZA3UL_FreeRTOS10_eGML\Renesas
Select Workspace
image 2022-11-02 155357893.png
  • image 2022-11-02 160723018.png
    1. The Project Explorer in the IDE should be empty
    2. Import the TES Projects into the IDE
      1. Right click in the Project Explorer and Select Import
      2. In the Import Dialog select  General -> Existing Projects and Workspaces
      3. In the Import Projects Dialog press the Browes Button then press the Select Folder Button in the popup dialog. Select only the following projects then click Finish.
        1. BSP
        2. SR_GuilianiDemo
    3. Select the SR_GuilianiDemo Project. Right Click and select build. This build will do the following
      1. The Build will attempt a clean first. This will cause an error as there is nothing to clean
      2. Next the Build will first build the BSP Library
      3. Finally the SR_GuilianiDemo will build with no errors
    4. The Generated executable and library files
      1. SR_GuilianiDemo ELF file
        1.   Debug information
      2. SR_GuilianiDemo.sec
        1.   Binary Code
      3. rza3ul_smarc_qspi_ipl.srec
        1. IPL boot loader
      4.   Resources.srec
        1. This is the GUI Widget Resouce file. This is generate the GSE.
    5. Download ( J-Link)
      1. This section refers the Debug Configuration “Renesas GDB Hardware Debug”.
        1.  Connect power to the USBC connector
        2. Connect the J-Link to the Smarc Module. Use the dongle that is provided.
        3. Press and hold the red power button till the power leds are on.
        4. In the menu select Run -> Debug Configurations
        5. In the Debug Configuration Dialog select Renesas GDB Hardware Debug then SR_GuilianiDemo Debug.
          1. NOTE:  If Main Tab has a red dot this indicates the Project with the Debug Configuration was not compiled. Return to step 5.
        6.  A Segger Dialog window will show the progress of the download.

    Install the IPL

    TBD

    Display Configuration

    TBD