RZA2M FAQ

e2studio 2022-01 and later support FreeRTOS (with IoT Libraries ) for the RZA2M from scratch. Follow the steps below.

Step 1) Create a GNU for Renesas RZ C/C++ Executable Project. Then Create a project name.

This is an example of what the RZA2M Dialog Creation Settings should be.

Step 2) In the next dialog after creating project name the following setting are required.

Toolchain version: 7.2.1.20170904 ( versions exceeding this are not supported)
RTOS: FreeRTOS (with IoT libraries)
RTOS Version: v202012.00-rza2m-1.0.0 NOTE if this is not in the drop down you need to click the Manage RTOS Versions. Set the Target Device to a RZA2M be download.
Target Device: Set this to RZA2M part number
Language: C or C++
- NOTE: The Renesas drivers are written in C language. To uses these drivers follow the C standard to handle mixed C/C++ API and header usage.

Step 3) Use the default setting of every dialog after.

Step 4) Next open the smart configuration perspective for this project. This would be the ProjectName.scfg file ( i.e. Test.sctg).

Step 5) Click the generate Code in the SC Overview Information Window. This will generate the default drivers.

Step 6) By default a main.c file is not created. You will need to manually need to create this file and define the main function.

Step 7) Compile