RZ-V/RZ-V2MA SMARC: Difference between revisions

From Renesas.info
(→‎Getting Started: Added build summary)
Line 44: Line 44:
* ⚠️ The complete build environment created by 'Linux BSP package' + 'DRP-AI Support package' + 'DRP OpenCV package' must be '''combined into the same directory'''.
* ⚠️ The complete build environment created by 'Linux BSP package' + 'DRP-AI Support package' + 'DRP OpenCV package' must be '''combined into the same directory'''.
* Use the directory name "rzv_vlp_v3.0.0"
* Use the directory name "rzv_vlp_v3.0.0"
* '''Detailed instructions''' for setup and building are located in the '''RZ\V2MA Linux Startup Guide''' documents included in each ZIP package for "Linux BSP", the "RZ/V2MA DRP-AI Support Package" zip file, and "RZ/V2MA OpenCV Accelerator Support Package".
* '''Detailed instructions'''  
* ⚠️ You must '''first''' follow the '''Linux Startup Guide'''(r01us0578ej<version>-rzv2ma-linux-startup-guide.pdf) instructions '''Section 2.0''', but stop 🛑 '''before''' the 'bitbake' command.
** for setup and building are located in the '''RZ\V2MA Linux Startup Guide''' documents included in each ZIP package for "Linux BSP", the "RZ/V2MA DRP-AI Support Package" zip file, and "RZ/V2MA OpenCV Accelerator Support Package".
** Then, follow '''DRP-AI Support 'Release Note'<nowiki/>''' (r11an0592ej<version>-rzv2ma-drpai-sp.pdf) '''Sections 3.1 and 3.2''', but stop 🛑 '''before''' the 'bitbake' command.
** Build
** Finally Follow the '''OpenCV Accelerator Support Package 'Release Note'<nowiki/>''' ( r11an0650ej<version>-rzv2ma-opencv-accelerator-sp.pdf) Section 2.0.
*** ⚠️ You must '''first''' follow the '''Linux Startup Guide'''(r01us0578ej<version>-rzv2ma-linux-startup-guide.pdf) instructions '''Section 2.0''', but stop 🛑 '''before''' the 'bitbake' command.
 
*** Then, follow '''DRP-AI Support 'Release Note'<nowiki/>''' (r11an0592ej<version>-rzv2ma-drpai-sp.pdf) '''Sections 3.1 and 3.2''', but stop 🛑 '''before''' the 'bitbake' command.
* A summary of the instructions located in the Release Notes are below. Simply Copy/Paste the commands.
*** Finally Follow the '''OpenCV Accelerator Support Package 'Release Note'<nowiki/>''' ( r11an0650ej<version>-rzv2ma-opencv-accelerator-sp.pdf) Section 2.0.
** A summary of the instructions located in the Release Notes are below. Simply Copy/Paste the commands.
*** '''TDB'''

Revision as of 18:45, 29 September 2022

RZ/V2MA

← RZ-V

General Information

  • Official RZ/V2MA Device Website
    • Product Page
    • Please review the Documentation & Downloads section
  • Evaluation Board Documentation
  • Software Downloads
    • Check "Software & Tool Pages" section on on this page
    • Linux BSP Software
      • RZ/V2MA Linux Package [5.10-CIP] v1.0.0
      • RZ MPU Video Codec Library for RZ/V2MA
    • DRP-AI Linux Driver
      • RZ/V2MA DRP-AI Support Package Version 7.20
    • DRP Image Processing Package
      • RZ/V2MA OpenCV Accelerator Support Package Version 1.00

Getting Started

1. Software BSP Components

There is total of 4 packages to build the RZ\V2MA BSP. Up to 5 packages are used to build the BSP. Please download from the Official RZ/V2MA Website. Please look in the "Software Downloads" section.

Copy all ZIP file to a Linux PC.

The evaluation versions contain a time limitation that stops the software after a few hours.

  • RZ/V2MA Linux Package : r01an6514ej<version>-rzv2ma-linux.zip.
  • RZ MPU Video Codec Library for RZ/V2MA : RTK0EF0131F02000SJ-<version>_EN.zip
  • RZ/V2MA DRP-AI Support Package: r11an0592ej<version>-rzv2ma-drpai-sp.zip.zip
  • RZ/V2MA OpenCV Accelerator Support Package ( Image Processing):r11an0650ej<version>-rzv2ma-opencv-accelerator-sp.zip.

2. Build Environment

  • To build the BSP, you will need a Linux PC running Ubuntu 20.04. Only this Host OS version was tested.
  • You can use a Linux PC (recommended) or a Virtual Machine. If using a Virtual Machine, 200GB of hard drive space is recommended.


3. Build the BSP

  • ⚠️ The complete build environment created by 'Linux BSP package' + 'DRP-AI Support package' + 'DRP OpenCV package' must be combined into the same directory.
  • Use the directory name "rzv_vlp_v3.0.0"
  • Detailed instructions
    • for setup and building are located in the RZ\V2MA Linux Startup Guide documents included in each ZIP package for "Linux BSP", the "RZ/V2MA DRP-AI Support Package" zip file, and "RZ/V2MA OpenCV Accelerator Support Package".
    • Build
      • ⚠️ You must first follow the Linux Startup Guide(r01us0578ej<version>-rzv2ma-linux-startup-guide.pdf) instructions Section 2.0, but stop 🛑 before the 'bitbake' command.
      • Then, follow DRP-AI Support 'Release Note' (r11an0592ej<version>-rzv2ma-drpai-sp.pdf) Sections 3.1 and 3.2, but stop 🛑 before the 'bitbake' command.
      • Finally Follow the OpenCV Accelerator Support Package 'Release Note' ( r11an0650ej<version>-rzv2ma-opencv-accelerator-sp.pdf) Section 2.0.
    • A summary of the instructions located in the Release Notes are below. Simply Copy/Paste the commands.
      • TDB
Retrieved from "https://renesas.info/w/index.php?title=RZ-V/RZ-V2MA_SMARC&oldid=1688"