Future RZ/G2L Training
November 16, 2021
1:00PM-3:00PM EST

Agenda

TBD

Pre-Training Setup

Software to Download and Install

balena Etcher ( https://www.balena.io/etcher/ )
TeraTerm ( https://osdn.net/projects/ttssh2/releases/ )
USB-to-Serial Drivers for FTDI FT230X (https://ftdichip.com/drivers/vcp-drivers/ )
Download ZIP file of SD Card image (Link TBD)

Program micro SD Card image using a Windows PC

1. Unzip the SD card image file. Note that after you unzip, the .img file will be pretty big.

2. Plug in your Sd card into your PC using the USB adapter

3. Use the balena Etcher application to program that.img file into your SD card. That program is so easy to use, we don't need to write any instructions for you.

4. After programming is all done, you can place your SD card into the slot ON THE CARRIER BOARD (as in, the one next to the Etheret ports)

(Optional) Build the RZ/G2L BSP

This will not be required for the training. However, you are free to do this before the training in case you want to be prepared to ask questions.
Steps
- xxxx
- xxxx
- xxxx

Lab Procedure

(Rough Agenda)

Show online Resources available to customers
Boot the board with the SD Card that was created
Show How to run Demos
Explain/Show how the BSP is build
Explain/Show how the Bootloaders are updated in SPI Flash (Window PC method and Linux PC method)